Tubular Matting for anti-fatigue and insulation

Supa tough, Supa quality, Supa comfort

3 year commercial warranty

Comes in a range of colours

SIZES:

• 12M x 0.70M
• 12M x 0.91M
• 12M x 1.20M

Uses

Bars, hotels, cafeterias, banks, post offices, play-grounds, supermarket check-outs, laundries, clubs, caravan parks, resorts, swimming pools, laboratories, locker rooms, toll collection and parking lot booths, health centres, latrines and abolution areas, beach facilities, boats, workshops, garages, cars and 4WDs, walkways, showers, saunas, schools, shops, power stations, hospitals, barracks etc. Use an off-cut to sit on at your favourite sporting event.

• Hollow tubes give an "air cushion" effect, resulting in a reduction in user fatigue.
• Tube Tread® insulates against cold, damp, noise and electricity.
• Easy to maintain — mostly, you can just hose it down and put it straight back!
• Tube Tread® is Supa-tough — the tubing is innovatively welded to cross-tubes, resulting in a space-age duckboard which has to be vandalized to tear it apart.
• It is Supa-resilient — fragile dropped items are less likely to break.
• Inhibits mould, bacteria and fungal growth.
• It is Supa-safe — at a height of only 12 mm above the floor, it is not a trip hazard.

Joiner Block

To join matting, simply clip adjoining warps using this joiner block. Or, cut back the warps and join the wefts. Instant adhesive may also be used for more permanent joins. Ramp end and ramp edge combine to form a safety mitred corner on the matting. Optional reflective tape is also available.

Technical Details

Product —The matting is tubular extruded flexible PVC heat welded into a duckboard configuration to achieve a long lasting anti-fatigue, slip resistant capability for commercial, domestic, hospitality and industrial uses.

Product Details — The tubular wefts are a nominal 7.5mm diameter at nominal 36mm centres and the warps a nominal 7.2m cross section with nominal 5mm spacings.

Colours

• Wefts — Black (other colours subject to quotation & order quantity)
• Warps — Black, Blue, Brown (Dark), Gold, Green (Olive), Grey, Orange, Red (other colours subject to quotation)

Roll Dimensions — 910mm x 12mts (10.92 sq/mt), 3’ x 39’3” (118.2 sq/ft), Mat edge height nominally 12.5mm (1/2”)

Material Weight — Nominally 3.67 kg per lineal metre, 2.2lbs per lineal foot

Shore Hardness — A63

Specific Gravity — 1.24

Tensile Strength — 139 kg/cm

100% Modulus Elongation — 53 kg/cm

Elongation — 410%

Tear Strength — 37 kg/cm

Temperature Effect — Flexible from minus 10C to 60C (14F to 212F)

Flammability — This material does not support combustion, being self extinguishing on removal of flame. Gases evolved on flame application are predominately HCl and CO

Cutting — Use shears or knife blade and straight edge

Joining

• Side to Side — Use proprietary Poly Marketing‘Side Saddles’
• End to End — Cut back warps so as to butt over weft joining ‘Saddles’

Edging — Use Poly Marketing ‘Ramp Edging’ and solvent adhesive