Benefits

Hard-wearing — will not rot or splinter.
Inhibits mould, bacteria and fungal growth.
Slip resistant.
Comfortable to stand on.
Electrical and sound insulating properties.
Flame and chemical resistant.
Hygienic.
Impervious to oils, alkalis and acids.
Easily cut to shape, easily cleaned.
Comes in a range of attractive colours.
3 year commercial warranty.

Available with high visibility safety marked yellow band edges.
SIZES:

• 12M x 0.70M
• 12M x 0.91M
•   6M x 1.20M

Uses

Commercial kitchens - Marine vessels - Wharves - Vehicles - Golf clubs - Building entry points - Chemical plants - Garages - Machine shops - Power stations - Breweries - Laundries etc. Also protects floors against damage from spiked or sprigged boots. Keep a piece in your 4WD to help escape boggy ground!

Joiner Block

To join matting, simply clip adjoining warps using this joiner block. Or, cut back the warps and join the wefts. Instant adhesive may also be used for more permanent joins. Ramp end and ramp edge combine to form a safety mitred corner on the matting. Optional reflective tape is also available.

Technical Details

Product — The matting is a solid extruded profile of flexible PVC heat welded into a duckboard configuration to achieve a long lasting industrial quality, anti-fatigue insulating, slip resistant capability for heavy duty, long lasting requirements.

Product Details — The solid warps (with shark tooth surface pattern) and wefts are 7mm wide, with warps at nominal mm spacing and wefts at nominal 36mm centres.

Colours

• Wefts — Black (other colours subject to quotation & order quantity)
• Warps — Black, Blue, Brown (Dark), Gold, Green (Olive), Grey, Orange, Red (other colours subject to quotation)

Roll Dimensions — 910mm x 12mts (10.92 sq/mt), 3’ x 39’3” (118.2 sq/ft), Mat edge height nominally 12.5mm (1/2”)

Material Weight — Nominally 5.41kg per lineal metre, 3.7lbs per lineal foot

Shore Hardness — A63

Specific Gravity — 1.24

Tensile Strength — 139 kg/cm

100% Modulus Elongation — 53 kg/cm

Elongation — 410%

Tear Strength — 37 kg/cm

Temperature Effect — Flexible from minus 10C to 60C (14F to 212F)

Flammability — This material does not support combustion, being self extinguishing on removal of flame. Gases evolved on flame application are predominately HCl and CO

Cutting — Use shears or knife blade and straight edge

Joining

• Side to Side — Use proprietary Poly Marketing ‘Side Saddles’
• End to End — Cut back warps so as to butt over weft joining ‘Saddles’

Edging — Use Poly Marketing‘Ramp Edging’ and solvent adhesive